What are industrial safety products?

Industrial safety products are the equipment that protects people from injury at work — in factories, steel plants, workshops, warehouses, construction sites and kitchens. Most of it is PPE, short for personal protective equipment: things a worker wears, such as safety gloves, safety shoes, helmets, goggles and coveralls.

PPE is the last line of defence. It works alongside guarded machines, safe working methods and training, not instead of them — but where a hazard can't be removed, the right PPE is what stands between the worker and an injury.

B H Rubber Products supplies hand, foot and body protection — 157 products including safety gloves, safety shoes, coveralls, workwear and welding protection — as well as industrial flanges.

The 7 types of PPE

PPE is usually grouped by the part of the body it protects. These are the seven groups most often listed:

  1. 1Head protection

    Protects against
    Falling objects and knocks to the head.
    Examples
    Safety helmets, bump caps.
  2. 2Eye and face protection

    Protects against
    Flying particles, chemical splashes, and the bright light and spatter of welding.
    Examples
    Safety glasses, goggles, face shields, welding shields.
  3. 3Hearing protection

    Protects against
    Loud, continuous noise from machinery.
    Examples
    Ear plugs, ear muffs.
  4. 4Respiratory protection

    Protects against
    Dust, fumes, mists and gases.
    Examples
    Dust masks, respirators.
  5. 5Hand and arm protection

    Protects against
    Cuts, abrasion, punctures, hot surfaces, sparks and spatter.
    Examples
    Safety gloves, welding gauntlets, arm sleeves.

    From our range:Knitted gloves, Cut resistant gloves, Heat resistant gloves, Leather drivers gloves, Canadian gloves, Welding gloves, Arm sleeves

  6. 6Foot and leg protection

    Protects against
    Heavy objects falling on the feet, slips, and welding spatter on the shins.
    Examples
    Safety shoes and boots, leg guards.

    From our range:Safety shoes, Leg guards

  7. 7Body protection

    Protects against
    Heat, sparks, dirt and grease, and not being seen near moving vehicles.
    Examples
    Coveralls, aprons, welding jackets, hi-vis jackets, shirts and vests.

    From our range:Coveralls, Welding aprons & jackets, Safety jackets, Hi-vis shirts & vests, Lab coats & uniforms

Lists of “10 types of PPE” split these further — high-visibility clothing, fall protection (safety harnesses) and skin protection often get their own entries. Our catalogue covers hand and arm, foot and leg, and body protection, including hi-vis wear.

10 common pieces of safety equipment

A typical list of the safety equipment found on industrial sites, and what each one does:

  1. Safety helmet — protects the head from falling objects on sites and in plants.
  2. Safety glasses or goggles — keep flying particles and splashes out of the eyes.
  3. Face or welding shield — covers the whole face from spatter, sparks and arc light.
  4. Ear plugs or ear muffs — cut the noise reaching the ears around loud machinery.
  5. Dust mask or respirator — filters dust, fumes or gases out of the air you breathe.
  6. Safety gloves — knitted, cut resistant, heat resistant, leather and welding gloves for the hands. Browse gloves
  7. Safety shoes — a steel toe cap against falling objects, and a slip-resistant sole. Browse safety shoes
  8. Coverall — a one-piece suit that keeps dirt, grease and sparks off the body. Browse coveralls
  9. Hi-vis vest or jacket — fluorescent fabric and reflective tape so the wearer is seen by drivers. Browse hi-vis wear
  10. Safety harness — stops a fall when working at height.

What are Type 5 and Type 6 coveralls?

“Type” numbers come from the European classification of protective clothing against chemicals. Types 1 to 4 cover gases, vapours, and jets or sprays of liquid chemicals. The two you hear about most for coveralls are:

  • Type 5 — protection against hazardous dry particles, such as fine dust and fibres (EN ISO 13982-1).
  • Type 6 — limited protection against light sprays and small splashes of liquid chemicals (EN 13034).

A “Type 5/6 coverall” meets both, and is usually a disposable suit. The coveralls on this site are cotton and poly-cotton workwear coveralls (boiler suits) for general industrial work — they are not Type 5 or Type 6 chemical protective clothing.

Workplace hazards and the protection for each

Workplace hazards are commonly grouped into safety (mechanical) hazards, physical hazards such as heat and noise, and chemical, biological and ergonomic hazards. PPE mostly guards against the first two. Here are the everyday ones and what protects against them:

Cuts from sheet metal, glass, blades and sharp castings

Cut resistant gloves and arm sleeves. EN 388 is the rating to check.

Cut resistant gloves →

Handling hot parts and hot surfaces

Heat resistant gloves. EN 407 is the rating to check, especially contact heat.

Heat resistant gloves →

Welding sparks, spatter and radiant heat

Leather welding gloves, aprons, jackets, arm guards and leg guards.

Welding protection →

Abrasion, splinters and rough material handling

Leather drivers gloves and Canadian (leather palm) gloves.

Leather drivers gloves →

Heavy objects falling on the feet

Steel toe safety shoes to EN ISO 20345, with a 200 J toe cap.

Safety shoes →

Vehicles in yards, docks and on roads

Hi-vis jackets, shirts and vests with reflective tape.

Safety jackets →

Dirt, grease and wear on clothing

Coveralls (boiler suits) and work trousers.

Coveralls →

Basic safety rules for using PPE

  1. Choose PPE for the hazard, and check its rating — EN 388 for cuts, EN 407 for heat, EN ISO 20345 for safety shoes.
  2. Get the right size. Loose gloves can catch in machinery; tight ones tire the hands and wear through at the fingertips.
  3. Inspect it before every use. Replace gloves with holes or worn palms, and shoes with split soles or an exposed toe cap.
  4. Wear it for the whole job, not just the moments that feel risky.
  5. Make sure items overlap — sleeves and glove cuffs, apron and trousers — so there are no gaps at the wrists or waist.
  6. Keep it clean and store it dry. Dirty hi-vis clothing is much harder to see.
  7. Show people how to wear it and explain why. PPE only works when it is worn properly.

Questions

What is the full form of PPE?

PPE stands for personal protective equipment.

Where can I buy industrial safety products in Kolkata?

B H Rubber Products, 6A, Clive Row, Kolkata, supplies safety gloves, safety shoes, coveralls, workwear and welding protection. Send the product code and quantity on WhatsApp or email, or call +91 98301 64487, for price and availability.

How do I choose the right safety gloves?

Start from the hazard: cuts, heat, welding or general handling. Each glove category has a short buying guide — for example cut resistant gloves explains EN 388 cut levels, and heat resistant gloves explains EN 407.

Need safety gloves, shoes or workwear?

Send us the product codes and quantities and we'll come back with availability and pricing.