Flanges
API 6A Flanges
API 6A flanges for wellhead and Christmas tree equipment in oil and gas applications.
Weld neck, slip-on, blind, threaded, orifice and plate flanges, plus fire fighting and dairy flanges. Supplied from Clive Row, Kolkata — enquire on WhatsApp or email for availability and pricing.
Knitted & cut resistant
Leather gloves & welding
Workwear
Piping
Flanges
API 6A flanges for wellhead and Christmas tree equipment in oil and gas applications.
Flanges
Australian Standard flanges conforming to AS 4087 and AS 2129 for industrial piping systems.
Flanges
Large diameter weld neck raised face flanges per ASME B16.47 Series A (MSS SP-44).
Flanges
Large diameter weld neck raised face flanges per ASME B16.47 Series B (API 605).
Flanges
American Water Works Association standard flanges for water transmission and distribution systems.
Flanges
Solid flanges used to close the end of a pipe, vessel, or valve in a piping system.
Flanges
British Standard BS 10 table flanges for general industrial and water piping systems.
Flanges
Dairy/sanitary type flanges for hygienic piping in food and beverage processing.
Flanges
European standard EN 1092 plate flanges for industrial piping across Europe.
Flanges
EN 1092-1 Type 05/A blank flange with flat face for European piping systems.
A flange joins pipes, valves, pumps and equipment with a bolted, gasketed joint that can be taken apart for inspection and maintenance. Weld neck flanges have a long tapered hub butt-welded to the pipe and suit high pressure and temperature; slip-on flanges slide over the pipe and are fillet welded; socket weld flanges suit small-bore pipe; threaded (screwed) flanges need no welding; lap joint flanges turn freely for easy bolt alignment; blind flanges close off a pipe end; orifice flanges have tappings for flow measurement; plate flanges are flat discs for lower pressures.
Each flange is made to a standard that fixes its dimensions and bolt pattern — for example ASME B16.5 and B16.47, API 6A, EN 1092, BS 10, IS 6392, JIS, AS 2129 and AWWA C207 — so a flange must match the standard of the flange it bolts to.
When you enquire, give the standard, type, pipe size (NB or NPS), pressure class or rating, facing (raised face, flat face or ring type joint), material and quantity.